3.
Loosen the bolt (A) from the propeller shaft.
Remove the rear wheel & tire.
Tightening torque:
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)
Remove the fuel tank.
Loosen the bolt (A) from the propeller shaft.
Remove the stabilizer (A) from the stabilizer link (B).
Remove the bolt (C) form the stabilizer.
Tightening torque:
A, B: 100 ~ 120N.m (10.0 ~ 12.0kgf.m, 72 ~ 87lb-ft)
C: 45 ~ 55N.m (4.5 ~ 5.5kgf.m, 33 ~ 40lb-ft)
Remove the stabilizer bar.
Installation is the reverse of the removal.
