2.
Loosen the bolt and then remove the solenoid valve (E).
Remove the reservoir tank tube (A), left air spring tube (B), right air spring tube (C), compressor tube (D).
Loosen the bolt and then remove the solenoid valve (E).
Disconnect the connector (A).
Installation is the reverse of removal.
Do not damage the connector.
Confirm the tube color in installation process.
Reservoir tank tube | Blue (A) |
Left air spring tube | Yellow (B) |
Right air spring tube | Red (C) |
Compressor tube | Green (D) |
Confirm that whether the tube is escaped a not by puling it.
Air tube marking takes care not to be came off.
Take care not to drop.
Avoid suffering excessive impact.
Take care not to twisted.
When connecting, make sure each tube goes into the hole up to specified area.
