3.
If measured value exceeds the standard value, replace the wheel.
Tighten the hub nuts as follows.
Tightening torque :
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)
When using an impact gun, final tightening torque should be checked using a torque wrench.
Jack up the vehicle.
Measure the wheel Run-out by using a dial indicator as illustration below.
Radial mm(in) | Below 0.3(0.012) |
Lateral mm(in) | Below 0.3(0.012) |
If measured value exceeds the standard value, replace the wheel.
