1.
Connect the shift cable assembly (A)
Connect the shift cable assembly (A)
Install the shift lever assembly (B) by removing the four bolts(A).
Tightening torque :
9 ~ 14 Nm (5.0 ~ 6.5 Kgf.m, 36.1 ~ 47 Ib-ft)
Connect the interlock switch connector (A).
After Install the control cable nut (A), Install the shift cable in the 'F' direction by pulling the clib (B) on the floor.
Tightening torque :
9 ~ 13 Nm (1.0 ~ 1.4 Kgf.m, 7.2 ~ 10.1 Ib-ft)
Install the center console(A).(refer to Console in DS group)
Install the trey(A).
Remove the center console cover(A).
Insert the shift lever knob (A) with the specified force.
