2.
Disconnect the leveling hose (A), the fuel filler hose (B) and the ventilation hose (C).
Remove the rear-LH wheel, tire, and the inner wheel house.
Disconnect the leveling hose (A), the fuel filler hose (B) and the ventilation hose (C).
Remove the bracket mounting nuts (D) and remove the filler-neck assembly.
Installation is the reverse of removal.
Filler-neck assembly installation nut :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
