2.
Remove the air cleaner assembly (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable
Remove the air cleaner assembly (A).
Disconnect the vacuum hose (A) from the brake booster.
Remove the master cylinder. (Refer to Master cylinder)
Remove the ECM. (Refer to Fuel system group –ECM)
Remove the ABS control module. (Refer to ABS control module)
Remove the snap pin (A) and clevis pin (B).
Remove the mounting nuts.
Tightening torque:
12.7 ~15.7 N.m (1.3 ~1.6 kgf.m, 9.4 ~11.6 lb-ft)
Remove the brake booster.
