Remove the crash pad lower panel. (Refer to the Body group-crash pad)

Remove the IPM after removing the nut and connector. (Refer to the Body Electrical System group-BCM)

Disconnect the parking brake switch connector (A).

Remove the parking brake pedal mounting bolts and nut, then remove the parking brake pedal.

Remove the cable adjusting nut (B) and the mounting clip (C), then remove the parking brake cable.

Remove the floor console. (Refer to the Body group-Console).

Loosen the cable fixing clip and bolts and remove the rear parking brake cable which connected equalizer. And then remove front parking brake cable (A).

Raise the vehicle, and make sure it is securely supported.

Remove the rear tire and wheel.

Remove the brake caliper and Rear disc brake.

(Refer to "Rear disc brake removal")

Remove the parking brake cable (B), after removing the clip (A).

Remove the shoe hold down pin (A) and the spring (B) by pressing and rotating the spring.

Remove the adjuster assembly (B) and the lower return spring (A).

Remove the upper return spring (C) and the brake shoes (D).

Remove the operating lever assembly (E).