If engine cranking is possible but engine starting is impossible, Check "ON" condition of warning lamps on the cluster. This procedure would be important.
Especially, check "ON" condition of the MIL(malfunction indicator lamp) and the immobilizer warning lamp on cluster.
Main relay operating condition can be checked by watching the MIL(malfunction indicator lamp) status on cluster at IG key "ON".
Check "ON" condition of warning lamps (malfunction indicator lamp and immobilizer lamp on a cluster) at IG KEY "ON" and IG KEY "START".
Symptom | Inspection procedure | |
Case1 | ● MIL(Malfunction indicator lamp) and immobilizer lamp do not light up normally at IG KEY "ON". | ● Go to "Main relay is not operated inspection" |
Case2 | ● MIL(Malfunction indicator lamp) and immobilizer lamp light up normally at IG KEY "ON". | ● Go to "Main relay is operated inspection" |
Case3 | ● MIL(Malfunction indicator lamp) lights up normally but immobilizer lamp does not light up at IG KEY "ON". | ● Go to "Immobilizer inspection" |
