4.
Is the measured value within specification?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Replaces IATS ('BOOST PRESSURE SENSOR'), and go to "Verification of Vehicle Repair" procedure. |
IG key OFF.
Disconnect BPS connector.
Check resistance between 'Temp. signal' terminal and 'Ground' terminal of IATS ('BOOST PRESSURE SENSOR') connector. (BPS component side)
Temp. | Resistance | Temp. | Resistance | Temp. | Resistance | Temp. | Resistance |
0℃ | 5.11 ~ 6.12 ㏀ | 20℃ | 2.19 ~ 2.69 ㏀ | 40℃ | 1.02 ~ 1.26 ㏀ | 60℃ | 0.51 ~ 0.65 ㏀ |
Is the measured value within specification?
| ▶ Go to "Verification of Vehicle Repair" procedure. |
| ▶ Replaces IATS ('BOOST PRESSURE SENSOR'), and go to "Verification of Vehicle Repair" procedure. |
