2.
Remove the fluid level plug (A).
note
When the oil is warm, check or drain the oil.
Clean the fluid level plug and the surface near.
Remove the fluid level plug (A).
When the oil is warm, check or drain the oil.
Check that the fluid flows out of the fluid level hole. If not, add fluid as required.
When the fluid dribbles out of the fluid level hole, install the fluid level plug.
Tightening torque:
20~30 Nm(2.0~3.0 kgf.m, 14.5~21.7 lb-ft)
Clean the fluid level plug and the surface near.
Drain the fluid by removing the drain plug (B).
When the oil is warm, check or drain the oil.
Remove the fluid level plug to help drain the fluid.
Install the dran plug.
Tightening torque:
20~30 Nm(2.0~3.0 kgf.m, 14.5~21.7 lb-ft)
Add fluid untill the fluid flows out of the fluid level hole.
When the fluid dribbles out of the fluid level hole, install the fluid level plug.
Tightening torque:
20~30 Nm(2.0~3.0 kgf.m, 14.5~21.7 lb-ft)
