3.
Disconnect the A/C pressure switch connector (A) and then remove the A/C pressure transducer (B).
caution
Take care that liquid & suction pipe are not bent.
Disconnect the negative (-) battery terminal.
Recover the refrigerant with a recovery/charging station.
Disconnect the A/C pressure switch connector (A) and then remove the A/C pressure transducer (B).
Take care that liquid & suction pipe are not bent.
Installation is the reverse order of removal.
TORQUE : 10~12N.m (1.0~1.2kgf.m, 7.4~8.8lbf.ft)
