Install the exhaust manifold (A).
Tightening torque :
49.0 ~ 53.9N.m (5.0 ~ 5.5kgf.m, 36.2 ~ 39.8lb-ft)
The “TOP”mark of the gasket must be face the exhaust manifold.
Tighten the exhaust manifold mounting nuts as following method.
Install the exhaust manifold heat protector (A).
Tightening torque :
8.8 ~ 10.8 N.m ( 0.9 ~ 1.1kgf.m, 6.5 ~ 8.0lb-ft)
Install the LH/RH exhaust manifold stay (A).
Tightening torque :
34.3 ~ 41.2N.m (3.5 ~ 4.2kgf.m, 25.3 ~ 30.4lb-ft)
Reconnect the oxygen sensor connector (A) and Install the oxygen sensor connector bracket (B).
Install the oil level gauge (A).
Tightening torque :
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Install the air duct (A) and the air cleaner assembly (B).
Tightening torque :
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Install the engine cover (A).
Reconnect the negative terminal to the battery.
