5.
Remove the water outlet pipe (A).
Remove the timing chain. (Refer to Timing system in this group)
Remove the intake manifold and exhaust manifold. (Refer to Intake and exhaust system in this group)
Remove the injectors, high pressure pipe and delivery pipe. (Refer to FL group)
Remove the glow plug wiring.
Conform to what is described above because tension of the belt in this engine is higher than ones of other engines for preventing a slip.
Remove the water outlet pipe (A).
Remove the EGR pipe & hose assembly (A).
Remove the water outlet duct (A).
Remove the cylinder head cover (A).
Remove the camshaft bearing ladder (A).
Remove the sealing caps (A).
Remove the camshafts.
Remove the cam follower assembly (B) and HLA (Hydraulic Lash Adjuster) (A).
After removing it, HLA shall be held upright so that oil in it should not spill and be assured that dust does not adhere to it.
Remove the water hose and pipe assembly (A).
Use the SST (09367-3C100), remove the glow plugs (A).
Remove the timing chain case bracket (A).
Remove the cylinder head bolts.
Do not reuse the cylinder head bolts.
Remove the cylinder head (A) quietly in order not to damage the gasket with the bottom part of the end.
Remove the cylinder head gasket (A).
