1.
Loosen the drain plug (A) and drain the engine coolant.
Loosen the drain plug (A) and drain the engine coolant.
Remove the engine cover (A).
Remove the radiator grille upper guard (A).
Disconnect the AFS connector (A), and then remove the air cleaner assembly (B).
Tightening torque :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
Remove the intercooler inlet hose (A).
Remove the radiator upper hose (A).
Disconnect the BPS connector (A), and then Remove the intercooler outlet hose (B) and water hose (C).
Disconnect the A/C pipe(A).
Remove the radiator upper shroud (A).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Remove the cooling fan (A) and pan clutch (B).
Remove the radiator lower hose (A) and lower shroud (B).
Remove the ATF cooler hoses.
Remove the power steering oil cooler tube (A) from the cooling module.
Tightening torque :
8.8 ~ 10.8N.m ( 0.9 ~ 1.1kgf.m, 6.5 ~ 8.0lb-ft)
Remove the radiator mounting bracket nut (A).
Tightening torque :
9.8 ~ 14.7N.m ( 1.0 ~ 1.5kgf.m, 7.2 ~ 10.8lb-ft)
Remove the air guard (A).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Remove the radiator mounting bracket (A) and then separate the intercooler (B) and radiator assembly (C).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Installation is reverse order of removal.
Fill with engine coolant.
Start engine and check for leaks.
