3.
Loosen the bolt (A) from the propeller shaft.
Remove the rear wheel & tire.
Tightening torque:
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)
Remove the fuel tank.
Loosen the bolt (A) from the propeller shaft.
Remove the stabilizer (A) from the stabilizer link (B).
Remove the bolt (C) form the stabilizer.
Tightening torque:
A, B: 100 ~ 120N.m (10.0 ~ 12.0kgf.m, 72 ~ 87lb-ft)
C: 45 ~ 55N.m (4.5 ~ 5.5kgf.m, 33 ~ 40lb-ft)
Remove the stabilizer bar.
Installation is the reverse of the removal.
Check the stabilizer bar bushing for wear or damage and replace it if necessary.
Check the stabilizer bar link ball joint for damage and replace the stabilizer link if necessary.
