Monitor GDS Data
1.

Connect GDS with Diagnostic Connector.

2.

Engine "ON" and Turn on the auto head light system.

3.

Check "Head Lamp Status" parameter on GDS.

Specification : When Head Lamp is ON : "ON"

Fig.1) Engine ON : AHLS of Head Lamp Status

4.

Is the current data normal?

▶ This is a intermittent problem caused by poor contact of component or control unit.

▶ Thoroughly check the looseness, poor connection, bent, corrison, contamination, deformation or damage of connector.

▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure.

▶ Go to "Inspection and Repair" procedure.

Яндекс.Метрика