1.
Check status
(1)
IG "ON" & Engine "OFF"
(2)
Monitor the "ECM, Key and Smartra Status" Parameter on the Scantool.
Specification : 'LEARNT'
Fig1) This data show that 3 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt
(3)
Have both the ECM and KEY status been learnt ?
 | ▶Substitute with known good "virgin" transponder and go to "Component Inspection" Procedure. |
 | ▶Go to "Component Inspection" Procedure. |
