6719359

1.

Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.

2.

Ignition "OFF".

3.

Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.

4.

Disconnect RDSIS connector .

5.

Substitute the RDSIS and check for proper operation.

6.

Is DTC present problem ?

▶ Substitute a known-good SRSCM, and check for proper operation.

If the problem is corrected, replace SRSCM and then go to "Verification of Vehicle Repair" procedure.

note

If you strike or spin the SRSCM at the IG “ON” state, the seat-belt pretensioner, curtain-airbag or side-airbag could be unfolded and bring on danger. Handle it with care.

▶ Substitute a known-good RDSIS, and check for proper operation.

If the problem is corrected, replace RDSIS and then go to "Verification of Vehicle Repair" procedure.