Many malfunctions in the electrical system are caused by poor harness and terminal connections.

Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.

Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

Has a problem been found?

	▶ Repair as necessary and go to "Verification of Vehicle Repair" procedure .
	▶ Go to " Control Circuit Inspection " procedure.

IG "OFF" & Disconnect OCV connector.

IG "ON".

Measure voltage between control terminal of OCV harness connector and chassis ground.

Is the measured voltage within specification ?

	▶ Go to "Component Inspection" procedure.
	▶ Repair short to battery in OCV control circuit and go to "Verification of Vehicle Repair" procedure.