Component Inspection
■ Check VIV
1.

IG "OFF" and disconnect VIV connector.

2.

Measure resistance between power and control terminals of VIV connector.(Component side)

Specification : 30 ~ 35 Ω (22℃/71.6℉)

3.

Is the measured resistance within specification ?

▶ Substitute with a known - good ECM and check for proper operation. If the problem is corrected, replace ECM and go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known - good VIV and check for proper operation. If the problem is corrected, replace VIV and go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика