6.
Is the measured value within specification?
 | ▶ Go to "Component Inspection" procedure. |
 | ▶ Replaces GLOW RELAY, and go to "Verification of Vehicle Repair" procedure. |
IG key "OFF.
Disconnect 'GLOW RELAY'.
Check resistance between 'SNSR 3 FUSE 10A' (85) terminal and 'GLOW relay control (86)' terminal of 'GLOW RELAY' harness connector. (Measurement 1)
Specification : 75 ~ 85 Ω (20℃)
Supplies random 12V power to 'SNSR 3 FUSE 10A' (85) terminal and ground to 'GLOW relay control' (86) terminal ('GLOW RELAY' component side).
Check resistance between 'GLOW FUSE 10A' (30) terminal and 'GLOW COMPRESSOR' (87) terminal of 'A/C RELAY' component side. (Measurement 2)
Specification :
When power is supplied : Continuity (Below 1.0Ω)
When power is not supplied : Infinite (∞ Ω)
Is the measured value within specification?
| ▶ Go to "Component Inspection" procedure. |
| ▶ Replaces GLOW RELAY, and go to "Verification of Vehicle Repair" procedure. |
