Component Inspection
1.

Ignition off & Engine Off.

2.

Disconnect "ATM solenoid valve connector.

3.

Measure a resistance between "Shfit control solenoid valve(8L5R/B-VFS) " terminal and power at ATM solenoid valve connector.

Specification : 5.3 ± 0.3 Ω( 25℃)

4.

Is measured resistance within specification?

▶ Substitute with a known-good PCM/TCM and check for proper operation.If the problem is corrected, replace PCM/TCM and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known-good Shift control solenoid valve(SS-B) and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика