Terminal & Connector Inspection
1.

Ignition "OFF".

2.

Disconnect "Sports mode s/w" connector.

3.

Ignition "ON" & Engine "OFF'.

4.

Measure the voltage between wiring side of "Sport mode select s/w, Sport mode up s/w, Sport mode down s/w" and chassis ground.

Specification : Approx. 12V

5.

Is "Measured voltage" within specification ?

▶ Go to "Component Inspection" procedure

▶ Check for open or short in harness. Repair as necessary and Go to "Verification Vehicle Repair" procedure

Яндекс.Метрика