Component Inspection
■ Check PCSV
1.

IG "OFF" and disconnect PCSV connector.

2.

Measure resistance between power and control terminals of PCSV connector.(Component side)

Specification : 16 ± 2Ω ( at 20℃/ 68℉)

3.

Is the measured siganl waveform normal?

▶ Substitute with a known - good ECM and check for proper operation. If the problem is corrected, replace ECM and go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known - good PCSV and check for proper operation. If the problem is corrected, replace PCSV and go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика