Component Inspection
■ Check the operating of the air charging
1.

Connect scantool to Data Link Connector(DLC).

2.

IG "ON"

3.

Among actuation test items, select the "Reservior Charging" item.

4.

Is the reservoir tank charged well?

▶ Fault is intermittent caused. Go to "Verification of Vehicle Repair" procedure.

▶ Go to "Check effect by mechanical fault" procedure.

■ Check effect by mechanical fault
5.

Check if the problem comes under faults below.

- Pressure sensor stuck

- Air leakage in the ALS system

- Compressor damaged

- Reservoir valve stuck

6.

Is the possible problem detected?

▶ Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

▶ Fault is intermittent caused by poor connection in ALS ECU's connector or was repaired and ALS ECU memory was not cleared.

▶ Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика