Component Inspection
■ Check height sensor
1.

Locate the vehicle on the even ground and check the installation of the height sensor.

- Check if the Lever, Link or Bracket was damaged or bent

2.

IG "ON"

3.

After connecting scantool, Check DTC.

4.

Using scantool, Clear DTC.

5.

Again using scantool, Check DTC present.

6.

Is the same DTC shown, agian?

▶ Substitute with a known-good height sensor and check for proper operation.

If problem is corrected, replace height sensor and then go to "Verification of Vehicle Repair" procedure.

▶ This malfuction may temporarily happen by poor connection in the height sensor.

Go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика