2.
Install the mounting bolts(A,B-4ea) and the transfer assembly.
Lowering the vehicle or lifting up a jack, install the transfer assembly.
Install the mounting bolts(A,B-4ea) and the transfer assembly.
Connect the 4WD ECU connector(A) or EMC connector(B).
Install the rear propeller shaft(A).
Tightening torque :
58.83~68.64Nm(6~7kgf.m, 43.39~50.63lb-ft)
Install the insulator support bracket(A).
Install the cross member(A).
Install the front propeller shaft(A). (4WD)
Tightening torque :
58.83~68.64Nm(6~7kgf.m, 43.39~50.63lb-ft)
Install the front muffler(A) or muffer hanger rubber(B), by removing rear muffler(C).
Install the battery (-) terminal.
