3.
Disconnect the vapor hose (A,B,C) from the canister.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
Lift the vehicle with a jack.
Disconnect the vapor hose (A,B,C) from the canister.
Remove the canister after removing the canister protector installation nuts (D).
Check for the following items visually.
Cracks or leakage of the canister
Loose connection, distortion, or damage of the vapor hose/tube
A: Canister ↔ Atmosphere (via Fuel Tank Air Filter)
B: Canister ↔ Intake Manifold
C: Canister ↔ Fuel Tank
Installation is reverse of removal.
Canister protector installation nut :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Canister installation bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
