2.
Remove the split pin and bolt & nut (A).
Tightening torque:
80 ~ 100N.m (8.0 ~ 10.0kgf.m, 58 ~ 78lb-ft)
Remove the front wheel & tire.
Tightening torque:
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)
Remove the split pin and bolt & nut (A).
Tightening torque:
80 ~ 100N.m (8.0 ~ 10.0kgf.m, 58 ~ 78lb-ft)
Disconnect the front lower arm with the knuckle by using a SST (09568-34000).
Tightening torque:
90 ~ 120N.m (9.0 ~ 12.0kgf.m, 65 ~ 87lb-ft)
Be careful not to damage the lower arm ball joint boot when removing or installing the lower arm.
Loosen the bolt and then remove the front upper arm (A) from the frame.
Tightening torque:
120 ~ 140N.m (12.0 ~ 14.0kgf.m, 87 ~ 101lb-ft)
Installation is the reverse of the removal.
Check the front alignment.
(Refer to Tire/Wheel - "Alignment")
