2.
Remove the split pin and bolt & nut (A).
Tightening torque:
80 ~ 90N.m (8.0 ~ 9.0kgf.m, 58~ 65lb-ft)
Remove the rear wheel & tire.
Tightening torque:
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)
Remove the split pin and bolt & nut (A).
Tightening torque:
80 ~ 90N.m (8.0 ~ 9.0kgf.m, 58~ 65lb-ft)
Disconnect the rear upper arm with rear carrier by using a SST (09568-34000).
Disconnect the rear upper arm (A) with the frame by loosening the bolt.
Installation is the reverse of the removal.
Check the rear upper arm bushing for wear or damage and then replace the rear upper arm assembly if necessary.
