2.
Remove the passenger side glove box (A).
(Refer to the Body group – “Crash pad”)
Disconnect the negative (-) battery terminal.
Remove the passenger side glove box (A).
(Refer to the Body group – “Crash pad”)
After loosening the mounting screws, remove the glove box housing (A).
(Refer to the Body group – Crash pad”)
After disconnecting the smart key unit connector, loosen the smart key unit mounting nuts(B) and remove the smart key unit(A).
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel (A).
(Refer to the Body group - Crash pad)
Disconnect the connectors (A).
After loosening the mounting nut(1EA), disconnect the connector and remove the receiver (A).
Disconnect the negative (-) battery terminal.
Remove the console assembly(A). (Refer to the Body group - Console)
After loosening the antenna nuts(2EA) and connector, remove the interior 1 antenna (A).
Disconnect the negative (-) battery terminal.
Remove the console assembly (A).
(Refer to the Body group - Console)
After loosening the connector mounting bracket nuts at the back of the console, disconnecting the interior 2 antenna connector.
After loosening the nuts(2EA), remove the interior 2 antenna(A).
Disconnect the negative (-) battery terminal.
After loosening the mounting bolts, then remove the third seat assembly(A). (Refer to the Body group - Rear seat)
After loosening the connector mounting bracket nut(1EA), disconnect the antenna connector(A).
After loosening the nuts(2EA), remove the interior 3 antenna(B).
Disconnect the negative (-) battery terminal.
Remove the rear bumper.
(Refer to the Body group - Rear bumper)
Disconnect the antenna connector(A) on the right side of rear bumper.
After loosening the nuts(2EA), remove the exterior bumper antenna (A).
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel (A).
(Refer to Body group - Crash pad)
Disconnecting the connectors (A).
Remove the external buzzer (A).
Disconnect the negative (-) battery terminal.
Disconnect the connector after removing the door trim.
(Refer to the Body group - Front door)
After loosening the mounting bolt, then remove the key holder (A).
Remove the outside handle (A) by sliding it rearward.
Disconnect the negative (-) battery terminal.
Remove the tailgate trim.
(Refer to the Body group - Tailgate trilm)
Disconnect the connector. After loosening the remove tailgate garnish mounting nuts, then tailgate garnish (A).
Remove the outside handle (A) after loosening the outside handle mounting screws.
