1.
Remove the wiper arm nut (B) after removing the wiper cap (A).
Remove the wiper arm nut (B) after removing the wiper cap (A).
Remove the windshield wiper arm and blade (A) after removing a nut.
If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm.
Remove the weather strip and the cowl top cover (A) after removing rivets (6EA).
Disconnect the wiper motor connector (A).
Remove the windshield wiper motor and linkage assembly (A) after removing 2 bolts.
Reassemble the wiper motor ＆ linkage assembly and connect the connector.
Torque: 7-11Nm (0.7-1.1, kgf.m, 5.0-7.9 lbf.ft)
Reassemble the cowl top cover.
Reassemble the windshield wiper arm and blade.
Torque: 23~27 Nm (2.3~2.7 kgf.m, 16.6~19.5 lbf.ft)
Install the wiper arm and blade to the specified position.
Specified Position | A | B |
Distance [in(mm)] | 1.38 ± 0.2 (35 ± 5) | 1.38 ± 0.2 (35 ± 5) |
Set the washer nozzle on the specified spray position.
