2.
Check for continuity between the center poles of antenna cable.
Remove the antenna jack from the audio unit and antenna.
Check for continuity between the center poles of antenna cable.
Check for continuity between the outer poles of antenna cable. There should be continuity.
If there is no continuity, replace the antenna cable.
Check for continuity between the center pole of antenna cable and terminal of glass antenna. There should be continuity.
If there is no continuity, replace the antenna amplifier.
Check for continuity between the center pole (A) and outer pole (B) of antenna cable. There should be no continuity.
If there is continuity, replace the antenna cable.
Remove the rear roof trim (Refer to the Body group – Roof trim).
Disconnect the connector from the roof antenna.
Remove the roof antenna(A) after disconnecting the jack(B) and loosening the nut(C).
Install the roof antenna to the roof panel.
Tightening torque (Nut)
4 ~ 8 N.m (0.4 ~ 0.8 Kg.m, 2.9 ~ 5.8 lb-ft)
Reconnect the cable and connector to the roof antenna.
Install the rear roof trim.
Make sure the speaker connectors are plugged in properly.
Check the audio system.
