2.
Remove the crash pad lower panel (A) after loosening the screws.
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel (A) after loosening the screws.
Remove the lower crash pad switch assembly (A) after loosening the screws and then disconnect the connectors.
Disconnect the head lamp leveling switch (A) connector from the lower crash pad switch.
Connect the battery voltage between terminals 3 and 4.
Measure the voltage between terminals 4 and 5 (V) at each position.
Position No. | Rotation | Voltage (V) |
0 | 0° | 11.05 ± 0.5V |
1 | 20° | 9.1 ± 0.5V |
2 | 40° | 7.54 ± 0.5V |
3 | 60° | 6.63 ± 0.5V |
If the voltage is not as specified, replace the head lamp leveling switch.
