6732132

1.

Ignition OFF.

2.

Disconnect ATM solenoid valve connector.

3.

Measure resistance between DC solenoide vale terminal of ATM solenoid valve component and ON/START power.

Specification : 5.1±0.3Ω( 25℃)

4.

Is measured resistance within specification?

	▶ Substitute with a known-good PCM/TCM and check for proper operation.If the problem is corrected, replace PCM/TCM and then go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known-good DC solenoid valve and then go to "Verification of Vehicle Repair" procedure