Component Inspection
1.

Ignition off & Engine off.

2.

Disconnected "ATM solenod valve connector and PCM/TCM connector.

3.

Measure a resistance between "ON/OFF solenoid valve" terminal of ATM solenoid valve connector and chassis ground.

Specification : 10.5 ± 0.5 Ω( 25℃)

4.

Is measured resistance within specification?

▶ Substitute with a known-good PCM/TCM and check for proper operation.If the problem is corrected, replace PCM/TCM and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known-good ON/OFF solenoid valve and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика