2.
Remove the connector (A) & air tube.
Remove the rear wheel & tire.
Tightening torque :
90 ~ 110N.m (9.0 ~ 11.0kgf.m, 65 ~ 80lb-ft)
Remove the connector (A) & air tube.
Twists and then remove the air spring (A).
Installation is the reverse of removal.
Do not damage the connector (A).
Do not use the connector again.
Take care not to twist upper and lower.
Confirm that whether the tube is escaped a not by puling it.
When connecting, make sure each tube goes into the hole up to specified area.
