Component Inspection
■ Check Mode Switch
1.

IG KEY OFF.

2.

Disconnect Mode switch connector.

3.

Measure resistance between one and the other terminal of mode switch connector.

Specification :
4.

Is the measured value within specification ?

▶ Check TCCM connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known good Mode Switch and check for proper operation.

If the problem is corrected, replace Mode Switch and then go to "Verification of Vehicle Repair" procedure

Яндекс.Метрика