4.
Is the measured value within specification?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Replaces ECTS, and go to "Verification of Vehicle Repair" procedure. |
IG key OFF.
Disconnect ECTS connector.
Check resistance between 'Signal' terminal and 'Ground' terminal of 'ENGINE COOLANT TEMPERATURE SENSOR' connector. (ECTS component side)
Temp. | Resistance | Temp. | Resistance | Temp. | Resistance | Temp. | Resistance | Temp. | Resistance |
- 40℃ | 48.14㏀ | 0℃ | 5.79㏀ | 40℃ | 1.15㏀ | 80℃ | 0.32㏀ | 110℃ | 0.145 ~ 0.149㏀ |
- 20℃ | 14013 ~ 16.83㏀ | 20℃ | 2.31 ~ 2.59㏀ | 60℃ | 0.59㏀ | 100℃ | 0.19㏀ | 120℃ | 0.116㏀ |
Is the measured value within specification?
| ▶ Go to "Verification of Vehicle Repair" procedure. |
| ▶ Replaces ECTS, and go to "Verification of Vehicle Repair" procedure. |
