3.
Remove the plug from the disc.
Raise the vehicle, and make sure it is securely supported.
Remove the rear tire and wheel.
Remove the plug from the disc.
Rotate the toothed wheel of adjuster by a screw driver until the disc is not moving, and then return it by 5 notches in the opposite direction.
Install the rear wheel & tire after installing the plug on the disc.
Adjust the adjusting nut (B) so that parking brake pedal stroke is to be between 3~4notches when operating effort is 196 N (20 kg.f, 44 lb) after full stroke operation of parking brake pedal over 3 times for setting parking wire.
Adjust cable stroke with the equalizer adjusting nut (D) inside floor console if the cable adjusting nut (B) can’t be used because of insufficiency of an adjusting section of the front cable.
The parking brake adjustment must be carried out after adjusting the rear shoe.
After adjusting parking brake, notice following matter.
Must be free from clearance between adjusting nut and pin.
Check securely that the brake is not dragging.
