Replacement
Front differential carrier
1.

Drain the differential gear oil.

2.

Remove the rear drive shaft.

3.

Remove the propeller shaft.

4.

Support the differential assembly(A) with the jack.

Tightening torque :

107.8~137.2N.m(11~14Kgf.m,79.5~101.2lb.ft)

5.

Remove the inner shaft bearing bracket assembly(A) from differential assembly.

Tightening torque :

88.2~107.8N.m(9~11Kgf.m,65.0~79.5lb.ft)

Tightening torque :

107.8~147.0N.m(11~15Kgf.m, 79.5~108.4lb.ft)

6.

After loosen the cover bolts(A), and remove the differential cover(B).

7.

Installation is the reverse of the removal procedures.

Rear differential carrier
1.

Drain the differential gear oil.

2.

Remove the rear drive shaft.

3.

Remove the propeller shaft.

4.

Support the differential assembly(A) with the jack.

5.

After loosen the cover bolts(A), and remove the differential cover(B).

6.

Installation is the reverse of the removal procedures.

Яндекс.Метрика