1.
Disconnect the negative cable (A) from the battery.
Disconnect the negative cable (A) from the battery.
Remove the engine cover (A).
Remove the radiator grill upper guard (A).
Loosen the drain plug and drain the engine coolant. Remove the radiator cap (A) to speed draining.
Disconnect the AFS connector (A) and breather hose (B) and then remove the air cleaner assembly (C).
Disconnect the radiator upper hose (A) and lower hose (B).
Disconnect the power steering fluid cooler pipe (A) from the cooling module by loosen the bolts.
Tightening torque :
8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1lb-ft)
Remove the radiator.
Disconnect the fan motor connector (A).
Disconnect the ATF cooler hoses (B).
Remove the cooling module mounting nuts (C).
Tightening torque :
18.6 ~ 27.5N.m (1.9 ~ 2.8kgf.m, 13.7 ~ 20.3lb-ft)
Remove the cooling module from the vehicle.
Separate the fan assembly and radiator assembly.
