3.
Remove the head lamp washer nozzle (A) after loosening bolts.
When servicing the washer pump, be careful not to damage the washer pump seal.
Do not operate the washer pump before filling the washer reservoir.
Failure to do so could result in premature pump failure.
Disconnect the negative (-) battery terminal.
Remove the front bumper cover.
(Refer to Body group - Front bumper)
Remove the head lamp washer nozzle (A) after loosening bolts.
Remove the washer hose and disconnect the washer motor connector (A) and washer fluid level sensor connector (B).
Remove the washer motor (A).
Remove the head lamp washer pump (A) after disconnecting the connector.
Remove the washer reservoir after removing 3 bolts.
