6.
Shifting the each position, check that the shift lever moves smoothly.
Insert the shift cable to the bracket and hold it with a new clip.
Align the manual lever hole to the hole on the transmission case and hold the position with a bar.
Eliminate shift cable free play of the shift cable.
Firmly hold the special bolt with a spaner and tighten the nut with the specified torque.
Tightening torque :
13 ~ 16 N.m (1.3 ~ 1.6 kgf.m, 9.40 ~ 11.57 lb-ft)
Take off the bar holding the manual lever.
Shifting the each position, check that the shift lever moves smoothly.
