Installation is the reverse of removal.
After replacement or reinstallation procedure of the automatic transmission assembly, must perform procedures below.
Adding automatic transmission fluid. (Refer to "automatic transmission system" in this group.)
After servicing the automatic transmission or TCM, clear the diagnostic trouble codes (DTC) using the GDS tool.
Diagnostic trouble codes (DTC) cannot be cleared by disconnecting the battery.
When deleting diagnostic trouble code, use the GDS as possible.
When replacing the automatic transmission, reset the automatic transmissions values by using the GDS.
Perform TCM learning after replacing the transmission to prevent slow transmission response, jerky acceleration and jerky startup. (Refer to "Automatic transmission control system (Repair procedures)" in this group)
After exchanging automatic transmission, input the EOL(End of line).
(Refer to "Repair procedures" in this group)
