Installation
1.

Remove the ignition key from the vehicle.

2.

Disconnect the battery negative cable and wait for at least thirty seconds.

3.

Connect the Seat Belt Pretensioner (BPT) connector.

Tightening torque

Bolt B: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)

4.

Install the Seat Belt Pretensioner (BPT) with a bolt.

5.

Install the upper anchor bolts.

Tightening torque

: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)

6.

Install the following parts. . (Refer to the Body group- Seat belt)

A.

Center pillar trim

B.

Door scuff trim

7.

Install the lower anchor bolts.

Tightening torque

: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)

8.

Reconnect the battery negative cable.

9.

After installing the Seat Belt Pretensioner (BPT), confirm proper system operation:

A.

Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.

Яндекс.Метрика