1.
Loosen the drain plug (A) and drain the engine coolant.
Loosen the drain plug (A) and drain the engine coolant.
Remove the radiator upper shroud (A).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Remove the cooling fan (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Remove the cooling fan clutch (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Compressing the tensioner (A) with a wrench in a left hand by turning it clockwise, start removing the drive belt (B) from the water pump side idler.
Remove the water pump pulley (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Remove the water pump (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Installation is reverse order of removal.
