2.
Loosen the drain plug (A) and drain the engine coolant.
Disconnect the battery nagative terminal.
Loosen the drain plug (A) and drain the engine coolant.
Remove the engine cover (A).
Remove the radiator grille upper guard (A).
Remove the air cleaner assembly.
Disconnect the Air flow sensor connector (A).
Disconnect the breather hose (B).
Loosen the hose clamp bolt (C).
Tightening torque :
2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)
Remove the air cleaner assembly (D).
Tightening torque :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
Remove the intercooler inlet hose (A).
Tightening torque :
4.9 ~ 6.9N.m (0.5 ~ 0.7kgf.m, 3.6 ~ 5.1lb-ft)
Remove the radiator upper hose (A).
Disconnect the intake air temperature sensor (IATS) connector (A), the over flow hose (C), and then remove the intercooler outlet hose (B) .
Tightening torque :
4.9 ~ 6.9N.m (0.5 ~ 0.7kgf.m, 3.6 ~ 5.1lb-ft)
Remove the suction hoses (A). (Refer to HA group)
Remove the radiator upper shroud (A).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Remove the cooling fan (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Remove the radiator lower hose (A) and lower shroud (B).
Remove the ATF cooler hoses.
Remove the power steering oil cooler tube (A) from the cooling module.
Tightening torque :
8.8 ~ 10.8N.m ( 0.9 ~ 1.1kgf.m, 6.5 ~ 8.0lb-ft)
Remove the radiator mounting bracket nut (A).
Tightening torque :
9.8 ~ 14.7N.m ( 1.0 ~ 1.5kgf.m, 7.2 ~ 10.8lb-ft)
Remove the air guard (A).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Remove the radiator mounting bracket (A) and then separate the intercooler (B) and radiator assembly (C).
Tightening torque :
7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)
Installation is reverse order of removal.
Fill with engine coolant.
Start engine and check for leaks.
