P0183 is set when the voltage below 172mV(0.172V) - minimum voltage of FTS output - is detected for more than 2.0 sec. This code is due to short to ground in FTS signal circuit.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
FTS circuit
•
FTS component | ||
Enable Conditions |
•
IG KEY "ON" | |||
Threshold Value |
•
When output signal is below the minimum value.(below 172mV) | |||
Diagnostic Time |
•
2.0 sec. | |||
Fail Safe | Fuel cut | NO |
•
FTS fixed at 80℃. | |
EGR Off | NO | |||
Fuel Limit | NO | |||
MIL | NO | |||
