This DTC is set, after PCM/ECM sends wake-up signal, if response signal from Smart key ECM is abnormal structure or is not valid message during PCM/ECM communication.
Item | Detecting Condition | Possible Cause |
Enable Conditions |
•
IG ON | 1. Faulty Smart Key ECM |
Detecting time |
•
1.5 sec. | |
Threshold value |
•
Data error or timing error 1. Data error : Head value error, checksum value error, Smart Key status unknown error 2. Timing Error : : Interval time of response from Smart key ECM after ECM request signal is longer than 40mS |
